High Temperature Engine Enamel
Product indicated for external application to parts and equipment subject to exposure to high temperatures.
Product indicated for external application to parts and equipment subject to exposure to high temperatures. Can be applied to fireplaces, hoods, metallic chimneys, metallic barbecue ovens, metallic ovens, boilers, automotive exhausts, with a maximum temperature of 600°C.
It is necessary to sand the surface very well, eliminating rust or loose parts so that adhesion issues do not occur. Eliminate oily contaminants or dust with a cloth dampened with Anjo Degreaser Solution Warning: Mechanical treatments (sanding is recommended for best results). Surface preparation should be carried out using abrasive blasting grade AS 2 1/2 (almost white metal) as poor surface preparation may cause adhesion problems.
Diluição
Ready to use.
Secagem
Drying time for touch dry is 1 hours. After application, wait 4 hours for the part to dry, then heat it up. Total curing of the paint will only take place after heating the part for 1 hour at 180⁰C, if this is not done, adhesion problems will occur.