Epoxi Sealer
Concrete, floor and tile surfaces, used to seal and provide adhesion before applying the final coating, such as: epoxy putties, repair mortars, low and high thickness finishes and self-levelling.
Concrete, floor and tile surfaces, used to seal and provide adhesion before applying the final coating, such as: epoxy putties, repair mortars, low and high thickness finishes and self-levelling.
Two-component colorless epoxy sealer for concrete, flooring and tiles, with high penetration to the substrate. This product provides an excellent adhesion bridge between the substrate and the paint system, as well as reducing the consumption of finishing paint. It has excellent moisture resistance properties, high hardness and easy application.
Diluição
Ready-to-use product. Check the environmental conditions and method of application beforehand.
Secagem
Temperature 25 °C
- To Touch: 2 hours
- Handling: 5 hours
- Repainting: 16 – 24 hours
- Full cure: 7 days
Demãos
Apply 1 to 2 coats respecting the interval of 16 to 24 hours between coats.
Rendimento
- 30 to 36 m²/catalyzed coat
Notes: Spreading rate values may vary according to application method, dilution, environmental conditions, and surface, and are calculated at the recommended dry coat thickness.
Cor/acabamento
Colors: Colorless
Finish: Glossy (depends on substrate type)
Norma(s)
This product complies with ABNT NBR 11702 type 4.1.1.8.